“Bluetooth@Home” is displaying in SCADA style the readings from the connected Bluetooth BLE devices.
This option can be used without Wi-Fi.
The readings can be also acquired through channels created by:“OpenMQTTGateway”,“ESP32-BLEMQTT” and
included “Arduino” program for ESP32 devices. It is possible to edit a simple control scenario in the program. Each screen symbol can be configured for the MQTT over WSS data exchange.
The readings are optionally storing in the embedded “SQLite” database.
The included BLE monitor tab is used for scanning, discovering and testing of the Bluetooth devices nearby.
There is Run Time Scripting Option.
The Run Time Scripting is useful when some specific initiation of device is required, or some cyclic operations have to be done.

“Bluetooth@Home” is based on a set of the graphic symbols with built in ability to be connected through the GATT interface to the sensors and controllers.
The design of a user screen with “Bluetooth@Home” is simple: open a “Draw” surface and one by one put on it the symbols from the menu bar. Link each symbol with an appropriate sensor and input the desired service and characteristic.
The configuration example: https://youtu.be/Mk7dEhqFaLU