EOB PT-WIFI

Application is used for remote control of PT32 WiFi (from 12.01), BT52 WiFi and BT725 WiFi thermostats from the company ELEKTROBOCK CZ.

With the EOB PT-WiFi application, your heating is still under control. Set the temperature or the entire weekly program, configure the entire system and control multiple thermostats from one application.

Control options:

1. The application is connected to the thermostat via a WiFi network or data via the ELEKTROBOCK server and you can conveniently control and program the thermostat from anywhere.
2. The application is connected to the thermostat via a local WiFi network and you can conveniently control and program the thermostat anywhere in range of your network (if you own a public IP address, you can access the thermostat even outside the local network).
3. The application is connected to the thermostat via the AP- access point thermostat and you can conveniently control and program the thermostat anywhere in range of this network.
4. The application allows connection with a thermostat even via a USB cable (for PC version only).
5. In the event of a WiFi fault, the thermostat can also be controlled manually.

Other benefits and features of the application:

• choice of system configuration via WiFi or via USB (PC only)
• adding users to control one thermostat
• multiple thermostats can be controlled from one application
• Display the current room temperature wherever you are
• Changing the required temperature
• Setting up to 7 week programs
• 2 additional programs for even/ odd week mode
• AUTO / MANU mode selection
• Pre-heating function
• Choice of three regulation types (Hysteresis / PI / PID )
• summer mode
• Permanently off-off mode
• holiday function
• Key lock with code
• Boiler maintenance
• temperature correction
• Setting the temperature range
• service mode with code
• Test the correct connection
• Device reset option (Service mode only)

More information at http://www.elektrobock.cz/termostat-s-wifi-modulem/p1731