MIDIberryM

A bridge application for generic Bluetooth MIDI adapter .
This is a higher edition of MIDIberry, and works in both directions,
works with multiple instances.

Not all devices are supported.
Please check the operation with the trial version before purchasing.

The MIDI data can be exchanged bi-directionally between Bluetooth MIDI adapter and DAW via virtual MIDI port application such as loopMIDI.

If you use it, first create two ports with loopMIDI.
Example:
-BLE-IN
-BLE-OUT

Specify the two ports created above for the INPUT and OUTPUT of MIDIberryM
on the right side of the application window.

On the left side of the application window, select the Bluetooth MIDI adapter. When you select a BLE-IN device, the BLE-OUT device is automatically selected.

Specify BLE-IN and BLE-OUT created by loopMIDI, respectively, for DAW input and output.

The specified I / O port is automatically saved and restored.

If no Bluetooth MIDI adapter is detected, click the Restart App button.

Note:

You can launch MIDIberryM from command line, then you can specify the MIDI ports.
- Example
start MIDIberryM /d=UD-BT01 /i=BLE-IN /o=BLE-OUT start MIDIberryM /d=MD-BT01 /i=BLE-IN2 /o=BLE-OUT2

Large amounts of system exclusive messages are dropped. This is due to the Windows specification, so I don’t think we can do anything.